Search results

Jupiter's Valero Chris, I saw Jupiter's Valero 4-Sale on Scream & Fly. Its a great looking rig and I actually considered buying it but I had my heart set on a Vegas.

Lets hear from the guys with the 20 footers. What kind of egg-beaters are you runnin? Whats your favorite prop or props. I'm spinning a worked 28 pitch chopper with my 1987 200 Black carb motor, I've got tite-heads (150 lb's), Boysen reeds, and a lite-weight flywheel. Its got a Bob's modified...

Back Together I was intimitaded at first but it wasn't that hard. I did have to buy 2 tools and I made the third. You have to have a carrier nut wrench and the bearing carrier puller made it very easy. I did replace the aft prop-shaft bearing in the carrier not because it was bad but because I...

Offshore Steven, if your refering to the black motors the off-shore lowers have the heavy duty bearing carrier. You can get 7 different versions of LWP from Bob's.

Way Cool Website Alan, you have a great web site. Very cool information about the Bond boat. There is a Glastron sitting on a lift here in Tampa that the owner is just letting waste away. I expect to someday see a 4-sale on it and will consider grabing it for a project. Thanks for all the...

Late Model In-Lines These props are for the late model 3 & 4 cylinder 70, 90, and 125 Black motors

Black V6 The standard acceptable end gap is 0.005 " per inch of bore. To determine the exact of end gap, simply multiply the cylinder bore by 0.005" Example: Bore = 3.00" times 0.005" equals an acceptable end gap of 0.015" Steven this is right out of a Seloc manual:bigthumb:

Seals Chris, I didn't buy a complete seal kit. I had to piece it out after finding that my lower had been basterdized by a previous owner or repair shop. Although my lower acts and operates like an EZ-shift it actually has the bearing carrier from a cam-shift lower. The prop shaft on a...

Just wanted to let you guys know what I found in my lower after losing reverse. I suspected that the surface where the clutch dog and reverse gear mated would be mush but was pleasantly surprised when I disassembled everything to find a broken $ 5.25 part. The shift cam was chipped on the end...

13 1/4 x 22 Pro Tour Stainless near new, used one day $ 150 TYD 13 1/4 x 20 Brand unknown 8 outta 10 (no nicks, dings, ect.) $ 140 TYD I can E-mail pictures if needed douglas.glover@suncoastfcu.org Both of these props are for Merc small hub ( 4 1/4 inch ) gear-case

Chris, would you add " HydroStream" as a Sub Forum under Brand Discussions. Thanks, Doug in Tampa:bigthumb: