No problem. But also I have read your other post and I myself am not sure on all that of what will and not work, I have only really been around lake and performance style boats, Of merc and volvo. Sorry about that. Good luck with it.
Well the most important thing is keeping the engine with in the recommended top rpm range at [WOT] Because if you do not do that, Then you would be more then likely wasting money some place else, And that still could be fuel or replacing a worn out engine sooner if you do not stay with in the...
I have found some good general info to help every one understand general engine over heat problems out of a mercruiser engine service manual, I hope this info will help some one out some day.:cheers:.
Engine Overheats (Mechanical)
Cause Special Information
Engine RPM below specifications at...
Engine Rotation
Engine rotation is determined by observing flywheel
rotation from the rear (stern end) of the engine looking
forward (toward water pump end). Propeller rotation
is not necessarily the same as engine rotation.
When ordering replacement engine, short blocks or
parts for engine, be...
Sorry I couldn't help much, Some are hard to find and others are even harder to find. I hope they test it for you before they give it back to you. It sounds like some shops do and some do not test it out on the lake when they are done with it, From what I have read on the fourms...
Hi,Well if you never owned a boat and want to try it out to see if it is your thing to do, Then I would recommend going to a few lakes first to help you get use to boating over all before going out in the ocean.And for starters we have lake elsinore, And that is a good lake to start out on to...
It sounds like you do have a service manual to that engine, and it seems like you are running out of pages to try.:brickwall: I was just curious,Have you tryd or thinking about trying the idea I came up with In post #4 ?
Just curious did you burn the new impeller up on the trailer? how long did you try to run it on the trailer. They say you really can not install the impeller wrong in the housing B/C it will fix it self at start up as long as you grease the impeller housing real good. The main thing is getting...
Thank you for the info, If you get a chance maybe you could post a link to the place that fixed you head Just in case he needs it.;):cheers: And:welcome:to Endless boating fourms:)
If that is with in the style drive you have try finding out from the dealer guy's where the fitting is and put a lot of grease in it to see is you get it to run right By doing that. From what you said this makes more sence the the exhaust manifold idea at least to me anyways But I could be...
You will need to look to see if your drive has the low water pick up holes I am talking about here, Your right around the year merc was changing stuff, So if you don't have the holes on the nose cone of the drive then you don't need to cover them up, but you will want to hook the water hose the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.