Search results

Crownlines are nice looking boats, And yours looks nice. And 50mph is fast enough for the fuel you are saving.;):):cheers:

If needed you could uses your compression testers hose for a leakdown. you connect the air compressure hose to the compression tester hose also make sure the schrader valve needel end is out of the hose. then pump air into a cylinder that is on the compression stroke [TDC]. Then lisen for air...

Have you found the rpm sticker yet, Or any info about your engine to help you out? Just curious:cheers:

Hi, I was thinking you might want to try doing a compression test and a leak down test to the engine to check the head gasket and the valves to make sure they are still ok before you keep putting money in it for nothing. Here is some info in this link that covers a leak down test I happend to...

Do you do just the glass or do/will you also make a frame around the glass with hardware [hings, ect,] If needed to compleate say a center part of a windshild the you would need to swing open to the left side so you can walk up to the bow of the boat??? thanks just curious.

Does the boat have a windshield mounted on the boat now or are you looking to install one to the boat. And if the boat has one right now, What is the name brand of the windshield on the boat???:)

I know what you mean about the head warranty guy, But I do half to say some times they get lost also, Because they do not do PARTS, If you can I would have the warranty guy set you up with the inhouse main parts guy so you can talk and send photos to each other so it should help on getting the...

Are the speeds the same or close to the same between the two engines? There might be a sticker on the engine some where telling you what the max rpm would be, Might want to try to find that just so you know what the max would be set to. Your engine may have a rev limiter proggramed in to the IGN...

Who orderd the seat, The dealer and they sent it to your home, Or did you call larson and talk to them and there parts guy placed the parts order for you??? Some boat manufacturer's are on top of there game and run there parts area like they are up to date with computers and all, And other boat...

I am not sure if this is what you are looking for or not, But I have three huge files for OMC Stearndrives in .PDF format if you can find a way to down load and open them then you might get lucky.Good luck with it.:cheers: Seloc manual #3400 OMC 64-86 Repair Manual 39,173 kb...

Sorry to say But this is normal and trim tabs will not help this. It is mainly the hull design that makes it wonder like that at slow speed, Some boats are worse then others, Tabs just kind of level the hull at speed from left to right and also they lift and lower the bow when needed. There is...

http://shop2.evinrude.com/ext/index.aspx?s1=bf6ad09c53cead335fcfd8a6471c0f7 Here is a link that talks about johnsons, I am not sure of your top rpms, But if you look at the engine real good I would think there would be a sticker on it some whrere that says your max rpm, Some times they are on...

Rain,:confused: It finely cooled down today to 90 degrees:bounce: From the last 2 weeks of having anywhere from 105-110 Here in socal;):p:eyecrazy::yell::pissed::):cheers::sssh:

Also you might get lucky, Try looking at your engine for a sticker that might have some of your basic engine specks info on it, Normaly that info will tell you your engines max rpm it should be running at. some times it is on top of the flame arrestor, Or on a valve cover, Some where in that...

About this and the way you learned to drive a boat and Knowing what you know now about boating, Do you still think a license is needed? Yes or no??? Also Remember this has been the way boating has been for years, Learn as you go, Just try to becarefull is all. People have car accidents every...

What style wellcraft do you have? And what size volvo engine/drive, Do you have. Volvo and merc, Has a set hight limit for the top of the exhaust risers to be over the boats water line, That the boat manufacturer's will normaly try to go by. And I believe the hight should be 13" inches on volvo...

I agree, The prop could flex and hit it, There is a little play in the prop shaft also, And it could hurt the boats performance in some cases.:eek::). Good find chris.;)

Yes normaly the bolt sits deep down into the case, And you just unscrew the plate and it will drop down. Here is a link to the style of allens I was thinking about that you MIGHT need to use if the normal allens do not work for you. I normaly use the style you would use a ratchet to unscrew it...

Hi, What drive do you have?If you have a older style alpha It should be a 3/8 allen, And some times you will need to use the style with a rounded end at the end, I believe they call it a ball end allen set. if your drive is not a gen 2. If the plug above the hole was missing there could be...