S steven Member Nov 13, 2008 #1 does any one know wat the ring gap is suppost to be on a 1983 200 merc black max?
E Enticer1 Member Nov 22, 2008 #2 Black V6 The standard acceptable end gap is 0.005 " per inch of bore. To determine the exact of end gap, simply multiply the cylinder bore by 0.005" Example: Bore = 3.00" times 0.005" equals an acceptable end gap of 0.015" Steven this is right out of a Seloc manual
Black V6 The standard acceptable end gap is 0.005 " per inch of bore. To determine the exact of end gap, simply multiply the cylinder bore by 0.005" Example: Bore = 3.00" times 0.005" equals an acceptable end gap of 0.015" Steven this is right out of a Seloc manual
